Chameleon Gloss Silver Flake Finish Film Wrap roll 1.52M X 30m

Brand New never used.

Features:

1. Car Wrap
2. Can be applied on interior and exterior surfaces of a car
3. Can be applied easily on all the common car paints
4. Cost-effective
5. Without residual glue after remove
6. Face film:PVC 0.2mm
7. Adhesive backing with air release technology for a bubble free
8. Weight: 20KG

- Durable
- Scratch Resistant
- Resistant To Solvents
- Easy Cleaning & Maintenance
- Stylish
- Can Stick Anywhere



Installation Tips:
Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.
Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinkles
Using a soft rubber squeegee will help smooth out bubbles and wrinkles

Installation:

1. First volume of a good length for your body size, according to the amount of good film cut to size the length of a good car, cutting out when the multi-cut 3-5cm, in order to facilitate construction.
2. To clean the surface and around the body in order to avoid dust, you can spray some of the appropriate mixture of water and Xidi Ling to the car body and car membrane for water and scraping the mucous membrane when the bubble.
3. Film when the surface curvature is large, the wind can be a hair dryer or heat gun can be attached more perfect.
4. Finally, the body lines with a knife according to film, the excess membrane can be torn off, the construction is completed.